To fix: Simply clean the inside of the rear plastic trim thoroughly along the bottom edge using an alcohol wipe (or similar) and let it dry. Peel off the green backing for the double-sided tape on the SLUK spoiler and fix the edge to the inner edge of the rear GTS plastics. Then use the supplied drill bit to drill two holes and fix using the self tappers (supplied).
Then connect the 3 wires on the LED to the wires on your GTS rear light (preferably by splicing and soldering). You’ll need to remove your rear light to gain access and feed the LED wiring up through the hole in the frame where the rear light wiring is located.
THE LED WIRING IS AS FOLLOWS
BLACK = GROUND
BLUE = RUNNING LIGHT (50% brightness)
RED = BRAKE LIGHT (100% brightness)
SLUK Plastics™️ are shipped in 98% recycled materials – helping to offset the damage our lovely scooters do to the environment (probably).