KR CNC fuel tap
CNC fuel tap suitable for large frames, small frames and all other Vespas with a straight fuel tap.
Outlet turnable to allow a direct routing in direction of the carburettor. Base body and rotating element for the connection of the fuel tap lever milled from aluminium. Inner diameter of all bores at least 6mm
Flow rate maximum 2L/min with a vertical outlet.
Flow rate in PX configuration 1L/min also in reserve mode until the tank is completely empty.
The tap has two closed positions (0° and 270°).
All seals are made of FKM / Viton. The seal between tank and cock is doubled. The rotary element is equipped with an O-ring and flat seal.
The diameter of the fuel hose 8mm (see separate listing) and also the listing for this revolutionary fuel filter…
Fuel filter suitable for CNC fuel tap
The perfect complement for the fuel tap.
Without flow reduction and not inline but self-cleaning with special filter fleece directly integrated into the tank. Easy installation with the fuel tap wrench. If cleaning is necessary, the filter can be removed from the nut (magnetic) with long-nosed pliers and cleaned under the tap. Afterwards, the filter can be put on the steel nut again with the magnets.